Our services
End-to-end water systems, engineered as one.
Surveys, borehole development, pumping, storage, irrigation and water quality reporting—coordinated from one accountable team.
01
Hydrogeological surveys
Initial assessment of subsurface conditions to identify viable water sources, define an optimal borehole location and frame depth and yield expectations.
- Site reconnaissance and geophysical assessment
- Recommended drilling position
- Depth and aquifer interpretation
- Technical survey reporting
02
Borehole drilling & development
Rotary drilling with site-appropriate fluids, food-grade uPVC or stainless-steel casing and screens, hydraulic development and test pumping.
- Typical depth: 50–150 metres, site-specific
- Standard 6-inch borehole diameter
- Purging, airlifting and yield testing
- Wellhead safety and final documentation
03
Solar pumping systems
Pump and power systems selected from required flow rate, total dynamic head and tested yield—designed for reliable off-grid operation.
- Submersible pump selection
- Solar array and electrical controls
- Dry-run and surge protection
- Commissioning and operator guidance
04
Water storage infrastructure
Storage and distribution systems sized around daily water demand, pumping cycles and the pressure required at the point of use.
- Polyethylene and steel storage options
- Tank bases and elevated structures
- HDPE or galvanised pipework
- Fittings, controls and distribution
05
Climate-smart irrigation
Efficient irrigation and water delivery designed to support continuous production, stronger crop quality and lower climate exposure.
- Demand and crop-area assessment
- Pressure and flow planning
- Storage-to-field distribution
- Solar-friendly pumping cycles
06
Water quality & handover
Comprehensive water analysis through an accredited laboratory, followed by clear reporting, system commissioning and documented handover.
- Representative sampling
- Laboratory quality analysis
- Commissioning checks
- Final reports and asset documentation
Planning guide
Indicative benchmark cost ranges.
These standardised benchmarks are a starting point for planning. Every project receives a tailored Bill of Quantities after site assessment.
| Item | Typical scope | Unit | Benchmark cost (KES) |
|---|---|---|---|
| Borehole drilling | Survey-informed drilling and casing | Linear metre | 8,000–15,000 |
| Development & purging | Hydraulic development and airlifting | Per borehole | 40,000–70,000 |
| Submersible pump | 5.5kW, 4-inch, tailored to depth | Per unit | 120,000–250,000 |
| Ancillary pump equipment | Control panel, cables and safety rope | Per borehole | 30,000–60,000 |
| Water quality testing | Comprehensive accredited-lab analysis | Per test | 10,000–20,000 |
| Storage tank (5,000L) | Polyethylene tank and base structure | Per unit | 50,000–80,000 |
| Pipework & fittings | Pump-to-tank connection and distribution | Per project | 25,000–50,000 |
| Project management | Site visits, coordination and reporting | Per project | 75,000–150,000 |
Important: Final pricing depends on geology, depth, location, access, yield requirements and the selected system configuration.
Built for your site
Start with the right assessment.
Tell us your location, intended use and water demand. We will recommend the appropriate survey and project path.